What is Dreve's Slogan?
Innovation from Tradition
What year did Dreve begin?
1949
What are the names of the two impression silicone products we carry?
Dynax & Zerosil
Promote Dynax Silicones
Snap-effect
Optimised hydrophilic properties
Scannable surface
Improved mechanics
Impression process takes less than 3 minutes
Name the 5 Dynax Products
1. Dynax putty
2. Dynax heavy body
3. Dynax light
4. Dynax mono
5. Dynax clear
Can Dynax light be combined with other Dynax products?
Yes!
Zerosil soft is a high-quality and low-cost alternative to what polymer?
Alginate
We now have a new Zerosil Soft with an added color indicator? What is the purpose of the color indicator?
It visually reflects the setting process using a 1:1 color gradient. The final color is only achieved when the curing phase has ended.
Check Page 12 of the Katalog for a comprehensive table regarding when to use Dynax or Zerosil products. This would be a good reference for new customers as well.
Ok. Will do.
What are our StoneBite products used for?
Bite registration
Since we're about to do a big marketing push for StoneBite, please describe StoneBite.
Addition-curing silicone with an extreme final hardness of 48 Shore D. Absolutely precise and reliable. Especially suitable for bite registrations and registration keys for support pins.
What does "Shore D" mean?
Shore D is the measuring unit for the determination of the hardness of non-flexible materials, if beyond 90 shore A.
Every impression silicone besides StoneBite is between 40 and 90 Shore A
In addition to StoneBite, what is the name of our other bite registration material?
Regofix transparent/opak
What is the main impression taking accessory we sell?
Mixing Tips
What is the name of our temporary C&B (crown & bridge) material?
Fixtemp C&B
Comes in 4:1 or 10:1 mixing ratio
Describe the FotoDent product world in general
"Generative production from one source"
-Resins
-3D printer
The system concept involves resins and post-curing units from one source which are perfectly matched.
There are 8 categories in the FotoDent product world. Can you name all 8?
1. Dental drill guides
2. Dental gingiva masks
3. Castable moldings
4. Indirect bonding trays
5. Dental setup models
6. Denture bases
7. Dental models
8. Dental individual trays
Describe FotoDent denture
Light-curing resin for the production of denture bases.
MMA-free and stable in color
Describe FotoDent IBT
Light-curing resin for the manufacturing of transparent indirect bonding trays (IBT). Simple removing and usable with all common bracket systems
Describe FotoDent guide
Light-curing resin for the manufacturing of dental drill guides.
Describe FotoDent tray
Biocompatible light-curing resin for the manufacturing of dental impression trays. Significantly reduces manual reworking
Describe FotoDent cast
Light-curing resin for the production of burn-out molded parts for the dental casting technique. Can be used with all commercially available embedding materials
Describe FotoDent setup
Light-curing resin for the manufacturing of orthodontic set-up models. The models are suitable for the thermoforming technique
Promote the BioBased FotoDent material
The biobased model is a resin that consists of 50 percent renewable raw materials made from wheat and maize(corn). This reduces the use of peroleum-based raw materials.
- Reduced impact on the atmosphere
- Free from carcinogenic substances
- Shorter cleaning times
Describe FotoDent model2
Especially developed for new generations of printers with 385mm. Faster printing process due to higher output.
Describe FotoDent gingiva
Light-curing resin for the manufacturing of dental gingiva masks. Combinable with models made of FotoDent BioBased and model2 resins.
Is the Bandelin RK 100 H a cleaning unit or a curing unit?
It is an ultrasonic CLEANING unit.
What is the name of our ready-to-use, water-based cleaning mixture for use in the Bandelin machine?
FotoClean
What is the name of our widely used curing unit for 3D printed parts? What gas is used?
PCU LED N2
Nitrogen
What is the technique Dreve has pioneered and continue to use for our dental plastics?
Thermoforming
What is our standard shape and diameter for our thermoforming blanks?
Round - 120mm
125mm can be ordered and square shapes are available as well
Name as many Thermoforming plastic products you can!
Possible Answers:
BioBleach
Biolon
Drufoplast
Drufolen
Drufosoft
Kombiplast
Describe BioBleach
Thermoforming blanks made for bleaching and medical trays. Comes in hard and soft.
Describe Biolon
A thermoforming blank made of PETG which is is supplied with an insulating film for the purpose of high transparency. Tough-elastic and can be built up with acrylate. Suitable for aligner, bite and occlusion splits and orthodontic appliances.
What is the difference between Drufolen H and Drufolen W
Drufolen H is a thermoforming blank made of polyethylene. it has hard-flexible consistency
Drufolen W is a thermoforming blank made of polypropylene. It has soft-flexible consistency.
Describe Drufosoft
Thermoforming blank made of ethyl vinyl acetate. Soft elastic and is ideally suited for sports mouthguards, positioners and duplication forms.
Describe Drufoplast
Red-opaque and extremely break-resistant. Suitable for base plates
Describe Kombiplast
Highly transparent two layer thermoforming blank with hard outer surface and soft inner side.
What is the biggest issue with Kombiplast in the US?
Delamination
The Vacfomat V9 2.0 is used to make aligner splints. What plastic material is most widely used with this machine?
Biolon
What is the name of our high-end thermoforming unit?
Drufomat scan
What is the name of our basic pressure thermoforming unit?
Drufosmart
Promote the Drufomat Scan
Perfect combination of technology, software and design
Easy operation
High working-pressure for all applications
Multi-functional professional unit
Working pressure of up to 6 bar.
What is Fillin?
Reusable block-out material on silicone basis, for covering undercut areas on the model.
What is Castdon?
A denture pouring system.
A complete cold-curing system for the resin pouring technique. Lower shrinkage and is easier, faster and cleaner.
What is the name of our pressure polymerisation unit series?
Polymax
Promote the Polymax Unit
Developed for holt and cold curing dental resins.
Solid and maintenance-free technique
Automatic safety-sealing systems
Stanless steel housing cover
What is the name of our Wax boil-out unit series?
Labormat
Can you name all 4 of our light polymerisation products?
Plaquit
NanoVarnish
Cenit L
Lightplast Base Plates
What is the name of our Light polymerisation unit series? What technique does it use?
EyeVolution. The LED technique.
What is the name of our line of duplication silicones?
Dubilsil
Can you name our other laboratory silicones and materials?
Laborsil
Silfix
GumQuick
MegaBase
Odontosil
What is the name of the series of Mixing-/Dosing units for laboratory silicones?
Dosper